Engineering

Oblique Stagnation Point Flow of Maxwell Trihybrid Nano-Material Over a Stretching Cylinder

Authors

  • Ayesha Saddiqa

    The University of Lahore, Sargodha campus
    Author
  • Yasir Mehmood

    The University of Lahore, Sargodha campus
    Author
  • Ammar Alsinai

    Ibb University Yemen
    Author
  • Muhammad Bilal

    Department of Physical Sciences, The University of Chenab, Gujrat, Pakistan
    Author

DOI:

https://doi.org/10.71107/rtczp951

Keywords:

Nanofluid, Stagnation Point, Cylinder, Maxwell Fluid

Abstract

The goal of the basic work is to, better understand how a Maxwell nanofluid flows in the stretching cylinder with active and passive controlled nanoparticles and study about oblique stagnation point blood flow of Maxwell nanomaterials over a stretching cylinder. Three different types of nanoparticles Cu + Al2O3 + TiO2  are considered with blood used as base fluid. This is accomplished by deriving the fluid flow and heat transfer governing equations from the conservation laws of mass, momentum, concentration and energy. Following that, the resulting partial differential equations are numerically solved using the proper techniques and boundary conditions. Similarity, transformation are applied to reduce the governing partial differential equations into a system of nonlinear ordinary differential equations, which are solved by numerically by shooting method coupled with Runge-Kutta method BVP4C. The effects of Prandtl number, Schmidt number, Thermophoresis parameter, Velocity ratio parameter, types of nanoparticles, nanoparticles concentration at the surface of cylinder, radius of cylinder and length of cylinder, effect flow behavior with active and passive nanoparticles on stretching cylinder are graphically illustrated and discussed. The main objective is to examined the oblique stagnation point flow of incompressible Maxwell nanofluid past a stretching cylinder with regulated active and passive nanoparticle concentration conditions.

Downloads

Download data is not yet available.

Author Biographies

  • Ayesha Saddiqa, The University of Lahore, Sargodha campus

    Department of Mathematics and Statistics, The University of Lahore, Sargodha 40100

  • Yasir Mehmood, The University of Lahore, Sargodha campus

    Department of Mathematics and Statistics, The University of Lahore, Sargodha 40100

  • Ammar Alsinai, Ibb University Yemen

    Department of Mathematics, Ibb University Yemen

  • Muhammad Bilal, Department of Physical Sciences, The University of Chenab, Gujrat, Pakistan

    Department of Physical Sciences, The University of Chenab, Gujrat, Pakistan

References

[1] Muhammad Jamil, Alam Najeeb Khan, and Nazish Shahid. Fractional magnetohydrodynamics Oldroyd-B fluid over an oscillating plate. Thermal Science, 17(4):997-1011, 2013. DOI: 10.2298/TSCI120406017J. DOI: https://doi.org/10.2298/TSCI110731140J

[2] Swati Mukhopadhyay, Krishnendu Bhattacharyya, and Tasawar Hayat. Exact solutions for the flow of Casson fluid over a stretching surface with transpiration and heat transfer effects. Chinese Physics B, 22(11):114701, 2013. DOI: 10.1088/1674-1056/22/11/114701. DOI: https://doi.org/10.1088/1674-1056/22/11/114701

[3] T. Hayat, Z. Abbas, and M. Sajid. MHD stagnation-point flow of an upper-convected Maxwell fluid over a stretching surface. Chaos, Solitons & Fractals, 39(2):840-848, 2009. DOI: 10.1016/j.chaos.2007.01.087. DOI: https://doi.org/10.1016/j.chaos.2007.01.067

[4] M. Sheikholeslami, M. Hatami, and D. D. Ganji. Micropolar fluid flow and heat transfer in a permeable channel using analytical method. Journal of Molecular Liquids, 194:30-36, 2014. DOI: 10.1016/j.molliq.2014.01.009. DOI: https://doi.org/10.1016/j.molliq.2014.01.005

[5] R. Ellahi, P. D. Ariel, T. Hayat, and S. Asghar. Effect of heat transfer on a third grade fluid in a flat channel. International Journal for Numerical Methods in Fluids, 63(7):847-859, 2010. DOI: 10.1002/fld.2105. DOI: https://doi.org/10.1002/fld.2105

[6] Kai-Long Hsiao. Combined electrical MHD heat transfer thermal extrusion system using Maxwell fluid with radiative and viscous dissipation effects. Applied Thermal Engineering, 112:1281-1288, 2017. DOI: 10.1016/j.applthermaleng.2016.10.151. DOI: https://doi.org/10.1016/j.applthermaleng.2016.08.208

[7] S. Malekzadeh and A. Sohankar. Reduction of fluid forces and heat transfer on a square cylinder in a laminar flow regime using a control plate. International Journal of Heat and Fluid Flow, 34:15-27, 2012. DOI: 10.1016/j.ijheatfluidflow.2012.01.006. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2011.12.008

[8] Mohamed Sukri Mat Ali, Con J. Doolan, and Vincent Wheatley. Low Reynolds number flow over a square cylinder with a detached flat plate. International Journal of Heat and Fluid Flow, 36:133-141, 2012. DOI: 10.1016/j.ijheatfluidflow.2012.03.008. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2012.03.011

[9] Hyoungsu Baek and George Em Karniadakis. Suppressing vortex-induced vibrations via passive means. Journal of Fluids and Structures, 25(5):848-866, 2009. DOI: 10.1016/j.jfluidstructs.2009.02.005. DOI: https://doi.org/10.1016/j.jfluidstructs.2009.02.006

[10] Ilyas Khan, Nehad Ali Shah, Asifa Tassaddiq, Norzieha Mustapha, and Seripah Awang Kechil. Natural convection heat transfer in an oscillating vertical cylinder. PLoS ONE, 13(1):e0188656, 2018. DOI: 10.1371/journal.pone.0188656. DOI: https://doi.org/10.1371/journal.pone.0188656

[11] M. Arif, P. Kumam, D. Khan, and W. Watthayu. Thermal performance of GO-MoS₂/engine oil as Maxwell hybrid nanofluid flow with heat transfer in oscillating vertical cylinder. Case Studies in Thermal Engineering, 27:101290, 2021. DOI: 10.1016/j.csite.2021.101290. DOI: https://doi.org/10.1016/j.csite.2021.101290

Downloads

Published

2025-04-30

Data Availability Statement

Data will be provided on request by corresponding author.

Issue

Section

Articles

Categories